Customization: | Available |
---|---|
After-sales Service: | Free Spare Parts, Video Support, Online Support |
Warranty: | 2 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
High-efficiency road shot blasting machine - professional road treatment solution!
The road shot blasting machine is an efficient and environmentally friendly ground treatment equipment, widely used in the cleaning, roughening and rust removal of concrete, asphalt pavement, bridge deck, tunnel and industrial floor. It can quickly remove slurry, oil stains and aging coatings, improve surface roughness, enhance the adhesion of waterproof layer or asphalt pavement, and significantly extend the service life of the road surface. The mobile design can adapt to different construction sites, greatly improving the flexibility and convenience of construction. The road shot blasting machine can efficiently clean the slurry and impurities on the road surface, and roughen the concrete surface to make it uniform and rough. The equipment is equipped with a dust collector to reduce dust pollution during construction. Compared with traditional fixed shot blasting equipment, the road shot blasting machine has a lower investment cost and is suitable for small and medium-sized projects.
How to use the machine
* First of all, Check the status of the equipment: ensure that the machine parts are not loose or worn, and that wearing parts (such as guard plates, rubber curtains, rollers, etc.) need to be replaced in time. Load qualified shot blasting materials and ensure that the work area is free of debris and personnel. Check the lubrication condition of each part and remove debris inside the machine to prevent blockage.
* Then turn on the dust collector to reduce dust pollution. Next, start the shot blasting machine and slowly push the equipment forward after the motor runs smoothly. Keep walking in a straight line at a constant speed to avoid duplication or missing areas.
* Finally, After turning off the power, remove the residual steel shot and dust in the separator, filter cartridge and blasting head. The reusable steel shot after screening should be stored dry to prevent rust.
* Note: Operators need to wear goggles, dust masks and earplugs. It is forbidden to run the blasting machine for a long time without steel shot to avoid damaging the blades.
Model | JW-SWL270 | JW-SWL550 | JW-SWL850 | JW-SWL1000 |
Working width | 270mm | 550mm | 850mm | 1000mm |
Supply power | 380v 3phase 50hz, 32a | 380v 3phase 50hz, 63a | 380v 3phase 50hz, 80a | 380v 3phase 50hz, 80a |
Main motor power | 11kw | 2x11kw | 2x15kw | 2x18.5kw |
Rated input | 0.75kw | 0.75kw | 1.1kw | 1.1kw |
Rotation speed | 3000rpm/min | 3000rpm/min | 3000rpm/min | 3000rpm/min |
Working efficient on concrete surface | >=150m²/h | >=300m²/h | >=450m²/h | >=550m²/h |
Working efficient on steel plate | >=40m²/h | >=80m²/h | >=120m²/h | >=150m²/h |
Walking speed | 0.5-20m/min | 0.5-20m/min | 0.5-20m/min | 0.5-20m/min |
Projectile consumption | <100g/m² | <100g/m² | <100g/m² | <100g/m² |
Main body Weight | 370kg | 680kg | 820kg | 920kg |
Main body size | 1900x380x1100mm | 1950x720x1130mm | 2050x1050x1450mm | 2050x1180x1450mm |
Dust collector | Matching filter cartridge dust collector | Matching filter cartridge dust collector | Matching filter cartridge dust collector | Matching filter cartridge dust collector |
1.Zhengzhou Jawo Machinery Co., Ltd is very professional in Manufacturing and exporting machines, and we established our factory since 1998, so, we are the senior leader already in China in machinery line.
2.We are factory, so, our advantages are supplying common machines in short delivery time and customizing machines according to client's require. We have our own excellent quality control department and well-trained skilled workers, all machines will be tested well before delivery,we will send machine pictures and videos before delivery.
3. Our machines have been exported to more than 100 countries, including countries in EU. Most machines have been passed through the CE certification, and we can accept any type of Inspection before shipment. We look forward to a Double-win cooperation with you.
Q:Are you a manufacturer or trade company?
A: We are a manufacturer. Zhengzhou Jawo Machinery Co., Ltd. is located in Zhengzhou city, Henan Province, China, have been in this industry since 1998 and passed Swiss SGS long time ago. Welcome to visit us.
Q:Do you have any certification?
A: SGS, CE, ISO etc.
Q:What do you do quality controlling?
A: All of machines need to be tested well before shipping.
Q: ls customization acceptable?
A Yes, it is customized on raw material processing, processing capacity, finishes product required.We can also make it as your design.
Q: What is the warranty of your machines?
2 years warranty is given.Within 2 years after the goods shipped, we will send new parts for free for any broken part(not by man-made operational mistakes).After 2 years, we just charge 90% of the cost of the parts.
Q:What is after-sale service given?
A: We offer 24 hours service call. Solve basic questions by Telephone, Email, Whatsapp, We chat and video call. Engineer will go to buyer's factory to install, test machines,and train buyer's staff how to operate, maintain machines. Operating manuals will be sent with machine or by email. We are also cooperating with a lot oversea service companies in many countries.